24-inch Multi-Format LCD MonitorDT-V24G2

DT-V24G2

JVC's DT-V24G2 is a versatile LCD production monitor designed for field, studio and broadcast image evaluation. Its 10-bit panel and wide gamma range make it ideal for critical image evaluation.

Key Features

  • 10-bit IPS panel with 1.073 billion color reproduction
  • High 1500:1 Contrast Ratio
  • WUXGA resolution: 1920 x 1200 pixels
  • Built-in Histogram, Waveform, Vector Scope, Zebra
  • Built-in Audio Level Meter up to 16ch
  • Lissajous audio metering
  • 4 Gamma Preset Modes
  • Wide array of markers and indicators
  • Two 3G-SDI & Dual Link inputs
  • IMD (in monitor display)
  • EBU 100% equivalent color spectrum
  • Optimized I-P conversion
  • Supports the EIA/CEA-708 and EIA/CEA-608 SDI closed captioning standards
  • Color Temperature settings (9,300K, 6,500K, 5,600K or User mode)
  • IP modes: Normal, Field, and Cinema (24p)
  • Pixel-by-pixel (1:1) display
  • Time code display (SDI)
  • Built-in stereo speaker
  • Tiltable stand with 2-way installation capability
Technical Specifications

DT-V24G2 - 24-inch Multi-Format LCD Monitor

General Specifications
Type
Multi-format LCD monitor
Screen Size
24 inches, 611.3 mm measured diagonally
Aspect Ratio
16:10
LCD Panel
Active matrix TFT
Effective Screen Size (W x H)
518.4 x 324 mm (20-7/16" x 12-13/16")
Pixels (resolution)
1920 x 1200
Display Colors
1.073 billion
Viewing Angle (typ.)
Horizontal / Vertical
178° / 178°
Brightness (typ.)
400 cd/m2
Contrast Ratio (typ.)
1500:1
Applicable Standard
3G SDI: SMPTE424M/SMPTE425M; DUAL LINK HD SDI: SMPTE372M; HD SDI: BTA S-004C, SMPTE292M; SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525; EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio Output
Internal: 1.0 W + 1.0 W (L/R)
Environmental Conditions
Operating temperature: 5°C to 35°C (41°F to 95°F), Operating humidity: 20% to 80% (non condensing)
Storage temperature
-20°C to 60°C
Energy Efficiency Class
C
Power Requirements
AC
120 V/220 V – 240 V, 50/60 Hz
DC
Rated Current
North America
0.72 A (AC 120 V)
Europe
0.42 A (AC 220 – 240 V)
DC
Power Consumption
On-mode
38.9 W
Stand-by mode
0.29 W
Annual Energy Consumption*
57 kWh/year
Dimensions (WxHxD) with stand excluding protrusions
564 x 448.6 x 243 mm (22-1/4"" x 17-11/16"" x 9-5/8"")
Dimensions (WxHxD) without stand
564 x 408 x 98.7 mm (22-1/4"" x 16-1/8"" x 3-15/16"")
Weight with stand
10.6 kg (23.4 lbs)
Weight without stand
7.7 kg (17 lbs)
Provided Accessories
AC power cord x1 (only for N.America), ßAC power cord x2 (only for Europe), power cord holder x 1, screw x 2 (for power cord holder), instruction manual x 1, core filter x1 (only for N. America), CD-ROM (instructions PDF file) x 1 (only for Europe)

*Annual energy consumption figures are based on the power consumption of the monitor operating 4 hours per day for 365 days. The actual energy consumption will depend on how the monitor is used.



Input/output connectors
Video
3G/HD/SD SDI (OUT 2: SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line switched out, BNC connector x 1
3G/HD/SD SDI (OUT 1)
Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line, BNC connector x 1
3G/HD/SD SDI (IN 1)
3G/HD/SD SDI (IN 2)
Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals): Auto detection, 2 lines, BNC connector x 2
Component(Y, PB/B-Y, PR/R-Y)
IN: 1 line; BNC connector x 3, Y: 1V (p-p), 750 (with sync);PB/B-Y, PR/R-Y: 0.7 V (p-p), 750
HDMI
IN x1 (compatible with HDCP)
VIDEO
Composite video signal Input/output: 1 line; BNC connector x 2,1V (p-p), 750 (IN and OUT are connected with a bridge connection. Auto termination.)
Audio
Audio Assign (IN 1)
Audio Assign (IN 2)
Analog audio signal input: 2 lines, RCA connector x 2, 3.5mm diam. stereo mini jack x 1, 500 mV (rms), high impedance
Audio Assign (MONITOR OUT)
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
External Control
MAKE/TRIGGER
RJ-45 terminal x 1 (8 pin)
RS-485
RJ-45 terminal x 2 (IN/OUT) (8 pin)
RS-232C
D-sub 9 pin x 1